SDAT-MHS-M50-1L-SA-E-0.3-M8 (1531265) position transmitter

OT-FESTO057278

Exemplary representation: SDAT-MHS-M50-1L-SA-E-0.3-M8 (1531265) Exemplary representation: SDAT-MHS-M50-1L-SA-E-0.3-M8
276,76€ incl. VAT
pcs
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Design For T-slot
Permission RCM mark,
c UL us - Listed (OL)
CE certificate (see declaration of conformity) to EU EMC directive
KC-mark KC-EMV
Material information halogen free,
RoHs compliant
Measured parameter Position
Measurement principle Hall magnetic
Recording range [µm] 0 to 50000
ambient temperature [°C] -25 to 70
Sampling interval type [ms] 1
Max. movement speed [m/s] 3
Resolution travel [mm] 0,05
Repeatability [mm] 0,1
Control output PNP
Switching element function Opener/closer switchable
Switch on time [ms] < 2 ms
Switch off time [ms] < 2 ms
Max. switching frequency [Hz] 1.000
Max. output current [mA] 100
Max. switching capacity DC [W] 2,7
Voltage drop [V] 2,5
Analogue output 4 - 20 mA
Sensitivity current output [mA/mm] 0,320
Linearity error typical in ± mm ±0.25 mm
Max. load resistance current output [Ohm] 500
Short circuit resistance yes
Overload resistant Available
Report I-port,
IO-Link
IO-Link, report Device V 1.1
IO-Link, profile Smart sensor profile
IO-Link, function classes Teach channel,
Diagnosis,
Identification,
Binary data channel (BDC),
Process data variables (PDV)
IO-Link, communication mode COM3 (230.4 kBaud)
IO-Link, SIO mode support yes
IO-Link, port type A
IO-Link, process data width IN 2 Bytes
IO-Link, process data contents IN 12 bit PDV (position measurement),
4 bit BDC (position monitoring)
IO-Link, minimum cycle time 1 ms
Operating voltage range DC [V] 15 to 30
residual ripple 10 %
Reverse polarity protection for all electrical connections
Electrical connection 1, connection type Cable with plug
Electrical connection 1, connection technology M8x1 A coded to EN 61076-2-104
Electrical connection 1, number of pins / wires 4
Electrical connection 1, fastening type Screw lock
Connection outlet direction along
Plug contacts material Copper allow,
Gold plated
Test conditions line Bending radius strength to Festo standard,
Cable track: 5 million cycles, bending radius 28 mm,
Torsional strength > 300,000 cycles, ±270°/0.1 m
Cable length [MTR] 0,3
Line properties Cable track+robot
Cable shield colour Grey
Cable sleeve material TPE-U(PUR)
Fastening type Insertable from above into the slot,
Permanently screwed
installation position arbitrary
Product weight [g] 19
Housing material High-alloyed stainless steels,
PA reinforced,
brass nickel-plated,
Polyester
Locking nut material Nickel-plated brass
Foil material Polyester
Operation-readiness display LED green
Switching status indicator LED yellow
Status display LED red
Setting options IO-Link,
Button
Ambient temperature for moving cable placements [°C] -20 to 70
Protection category IP65,
IP68
OT-FESTO057278
{{ $t('shop.all.gewicht') }} 19 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }} 90318020
{{ $t('shop.all.hersteller') }} Festo
{{ $t('shop.all.dokumente') }}

 
{{ $t('shop.all.unverbindliche_richtwerte') }}
{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.