360-degree view: KRED 168 MS - Reducer f. Compression ring screw connect. 16mm-8 (M12x1)mm, brass
Exemplary representation: Reducing insert for brass screw connection, brass
Application examples: Mounting for reducing insert brass screw connection
360-degree view: KRED 168 MS - Reducer f. Compression ring screw connect. 16mm-8 (M12x1)mm, brass
€13.33
Quantity
pcs
Immediately available from the warehouse; order by 16:30 and we will send it today.
Item description
Temperature range: -60°C up to max. +300°C (with seal: -20°C up to max. +80°C)
Recommended raw materials: Copper, polyamide (with reinforced sleeve)
Note: The brass compression ring screw connections cannot be combined with the cutting ring pipe screw connectors ISO 8434-1 (DIN 2353). When using soft copper tube a correction factor of 0.65 must be used (pressure x 0.65). When using polyamide tube the operating pressure of the tube applies.
Materials: brass
Application: With the use of reducing inserts you can use fittings with different hose diameters, e.g. a straight fitting with 10 mm Ø type KG 10 MS can be screwed together with 10 mm hose on the one hand. On the other hand, you can mount a 6 mm hose when using a reducing insert type KRED 106 MS. Thus, you have achieved a reduction from 10 to 6 mm. The reducing inserts can be used for all brass compression fittings. They consist of individual segments that separate from each other during assembly by means of predetermined breaking points.
Properties
Nominal diameter of the screw connection [mm]
16
Reducer for hose Ø [mm]
8 (M12x1)
Operating pressure with hard copper tube [bar]
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.