FUTURA air units, 2-piece., G 3/4", 0,5 to 8 bar, model series.4

Item number:

CL 34 F AM SI

€792.22
pcs
Item description
Version:
Self-relieving filter regulator with attached lubricator

Materials:
Body: PA 66 GF60, spring hood: POM, diaphragms and seals: NBR, container: polycarbonate

Temperature range:
-10 to +50 °C

Input pressure:
1.5 - 16 bar (model series 0: 1.5 - 12 bar)

Condensate draining:
semi-automatic**

Pressure gauge connection:
G 1/4" (model series 0: G 1/8")

Pore width in the filter:
5 µm

Media:
Compressed air, neutral gases

Advantages:
•automatic venting if there is overpressure on the secondary side,
•easy assembly of single components within a model series using coupling kits,
•Handwheel can be arrested in place by pressing it down and must be locked with a lock - please use VHS 20. Model series 0 cannot be closed,
•semi-automatic oil filling by connecting a hose at the bottom to the oil bowl (G 1/8"). Through this hose, upon pressing the oil fill button, the oil is sucked into the container (not for model series 0).


Max. condensate amount:
87 cm³

Switch panel thread:
M 50x1,5

Own air consumption:
Max. 1,5 l/min

Oil metering at 1000 l/min:
approx. 1 - 2 drops/min

Oil supply:
181 cm³

Lubricator reaction limit (at 6 bar):
115 l/min

Scope of delivery:
Air unit, including 50 mm pressure gauge

Flow:
115 to 12000 l/min, secondary relieving: 120 l/min

ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU

Optional:
Version with metal bowl and inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 to 16 bar) -AMNC, Safety version: with upstream lockable ball valve and filler valve -Si
Properties
Version Safety air unit (with upstream, lockable ball valve and filler valve)
Thread G 3/4"
Pressure regulation range [bar] 0,5 - 8
Container design Plastic container with protective cage
Condensate drain automatic
Pressure gauge display [bar] 0 - 10
Mounting brackets W 4 F
Coupling kit KP 4 F
Coupling kit with wall console KPW 4 F
input pressure [bar] 1,5 - 16
Further information on CL34FAMSI
Weight 4,2 kg / pcs
Customs duty number 84811005
RoHS compliant Yes
Documents
*Standard series, please prefer for use, since the pressure control range is universally usable, **As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented.

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available